Installing the SSD
1.
Insert the SSD controller board into the SSD plate.
2.
Secure the SSD controller board to the SSD plate by using the screws.
3.
Insert the SSD into the connector on the SSD controller board.
4.
Secure the SSD to the SSD plate by using the screw.
5.
Install the SSD plate over the SSD cover and secure it by using the screws.
6.
Turn over the SSD and secure the SSD plate cover by using the screws.
7.
Insert the SSD into the SSD slot on the computer.
8.
Close the hard drive/SSD bay press latch door.
9.
Install the:
a.
base cover
b.
battery
10. Follow the procedure in
Handle
Removing the handle
1.
Follow the procedure in
2.
Remove the:
a.
battery
b.
hard drive
or
SSD
c.
base cover
3.
To remove the handle:
a. Remove the screws that secure the handle to the computer [1].
b. Lift and remove the handle from the computer [2].
After working inside your
Before working inside your
computer.
system..
25