Using The Menu Mode; About The Menu Mode; Menu Mode Reset - Yaesu FTDX-9000MP Operation Manual

U
SING THE
The FT 9000's Menu mode includes 160 different settings, used for configuration of various transceiver fea-
DX
tures and functions that generally are set once, and then seldom changed.
Advice: The 160 items in the menu are grouped into 17 categories, and the groups are displayed at the left top
of the menu list screen. It will be most convenient for you if you initially select the group, by rotating the Main
Dial, and then select the individual menu item you want to work on.
G N M
AGC
This group is used for the setting up the AGC tim-
ing parameters. The AGC characteristics can sig-
nificantly affect the performance of the receiver,
and we recommend that you not change the set-
tings in normal use. If the setting gets changed
by accident, please do the menu mode reset de-
scribed at the right.
DISPLAY
This is the display-related group, related to the
Dimmer, Display color, clarifier display, etc.
FH-2
This is the group relating to the FH-2 keypad
setup.
GENERAL
This group covers miscellaneous items which are
not included in other groups.
MODE-AM, MODE-CW, MODE-DATA, MODE-DM,
MODE-PKT, MODE-RTTY, MODE-SSB
These are the groups related to items associated
with different operating modes, and which may
be configured separately.
RX AUDIO
This is the group related to the setting of the head-
phones and internal speakers.
RX DSP
This group pertains to the settings for the RX fil-
ter bandwidth, as well as other receiver filter con-
figurations.
SCOPE
This group is used to set the starting frequency
for the Spectrum scope on the FIX mode (band
by band).
TUNING
This is the Dial step configuration group.
TX AUDIO
This group is used for setup of the parametric
equalizer.
TX GENERAL
This group is used for setting the TX RF output,
configuration of linear amplifier switching, full-du-
plex operation, etc.
Page 44
M M
ENU
A
BOUT THE
FT 9000MP/C
ODE
MENU M
ODE
M
1. First turn off the radio by pressing the front panel
POWER switch.
2. Now, turn on the radio while pressing the
MNU key. The menu mode will be reset, and
the factory default configurations will come back.
D M
M RESET
O M