Temperature/Swr Indication; About The Temperature/Swr Indication; Explanation Of The Function Keys On The Temperature/Swr Indication Screen - Yaesu FTDX-9000MP Operation Manual

T
EMPERATURE
A
It is possible to display the VDD (TX Final Amplifier) voltage, bias voltage, the temperature of the heat sink of
the final devices, and the (swept) SWR characteristics/performance of the antenna connected, all together on
the Display screen.
E
XPLANATION OF THE
2/3.5 MARKER
This key turns the marker on the SWR character-
istic graph on and off.
The marker lets you identify quickly the frequency
on which a particular SWR reading is being ob-
served.
3/5
This key moves the marker cursor to the left.
4/7
This key moves the marker cursor to the right.
Page 32
/ SWR I
T
BOUT THE EMPERATURE
F K
UNCTION EYS ON THE
FT 9000MP/C
NDICATION
/SWR I
NDICATION
T /SWR I
EMPERATURE
5/10 ERASE
Press this key when you want to clear the mea-
sured SWR at the marker's current point.
6/14 SWR CK
To check the SWR on a particular frequency, ro-
tate the Main dial, and set the frequency to be
measured Now press [ 6/14 ]( SWR CK ) ; the SWR
will be measured and the result will be displayed
on the screen.
8/21 DISPLAY
Pressing this key momentarily takes you to the
"G C M /R
screen.
If you press and hold in this key for 2 seconds,
the screen will move to the "LOG B
D M
S
NDICATION CREEN
C F
" screen.
O M
"