Kenwood TM-732A Instruction Manual page 17

Basic functions performed with the F key
Crees 1 oid
©
O
Press the F key momentarily and then, within 10 Press and hold the F key for 1 second or longer, then
seconds, press one of the following keys: press one of the following keys:
Key Function Page Key Function Page
VFO/MPV Copy memory data into the VFO. 39 VFO/MP>V Change Scan Hold/Resume mode. 42
MR/M Write data into memory. 29, 30 MR/M Memory channel lockout. 43
Inhibit all keys except the PTT key and | Turns the Automatic Power Off function
MHz/LOCK | the F-+MHz key.
BD
MH2/LOCK | on and off.
es
CALL Change call channel data. 38 CALL Change hangup time. 58
SHIFT/DTSS | Change DTSS/Page data. 61, 66 SHIFT/DTSS bie to program the DTSS or Paging 61, 66
TONE/T.ALT Turns the Tone Alert function On and 71 =
'ONE/T.
OFF.
TONE/T.ALT | Tone frequency selection.
45, 59
REV/STEP Change the VFO Step size. 51 REV/STEP Beep tone level adjustment. 48
Turns the Automatic Band Change MUTE/ABC | Cross Band Repeater ON/OFF control. 58
MUTE/ABC | function ON and OFF. 31 oe
; ; = Low/DIM Selects noise activated squelch or S- 33
LOW/DIM Selects the display lamp intensity. 48 Meter squelch.
C. SEL Receive signals in the same band 31 C. SEL Selects the external speaker receiver 32
simultaneously. input.
BAND SEL ay the desired transmit band, VHF or 25 BAND SEL. Band ON/OFF control. 49