Table of Contents
Advertisement
▶
SATA1~10 & IDE Prmary Master/ Slave & E-SATA1/ 2
Press <Enter> to enter the sub-menu and the followng screen appears:
▶
Devce / Vendor / Sze (optonal)/ Current Mode (for SATA7~10)/ SMART Log (for
SATA7~10)
It wll show the devce nformaton that you connected to the IDE/ SATA/ ESATA
connector.
Important
SATA1~10 & IDE Prmary Master/ Slave & E-SATA1/ 2 are appearng when you con-
nect the HD devces to the IDE/ SATA/ E-SATA connectors on the manboard.
▶
Hold On
The settng determnes whether the system wll stop of an error s detected at boot.
When the system stops of the errors preset, t wll halt on for 15 seconds and then au-
tomatcally resume ts operaton. Avalable optons are:
[All Error]
The system stops when any error s detected.
[No Error]
The system doesn't stop for any detected error.
▶
System Informaton
Press <Enter> to enter the sub-menu, and the followng screen appears.
Ths sub-menu shows the CPU nformaton, BIOS verson and memory status of your
system (read only).
MS-7580
MS-7580
3-7
Advertisement
Table of Contents
