MSI TRINERGY Series Manual page 24

▍ ▍
Hardware Setup Hardware Setup
Installng Memory Modules
1. The memory module has only one notch on the center and wll only fit n the rght
orentaton.
2. Insert the memory module vertcally nto the DIMM slot. Then push t n untl the
golden finger on the memory module s deeply nserted n the DIMM slot. The plastc
clp at each sde of the DIMM slot wll automatcally close when the memory module
s properly seated.
3. Manually check f the memory module has been locked n place by the DIMM slot
clps at the sdes.
Important
You can barely see the golden finger f the memory module s properly nserted n the
DIMM slot.
2-8
Notch
Volt