Setting Up The Audio Options - Samsung DVD-R130 Instruction Manual

Manuat Channel Set can be used after you have
performed Auto Channel Memory.
Use the Manual Channel Setting to delete unnecessary
channels after finishing the Auto Channet Memory
process.
| 4. Setting Up the Audio Options
You can connect the DVD-R130 to an external audio
amplifier or a Home Theater system.
Allows you to setup the audio device and sound status
settings depending on the audio system in use.
With the unit in Stop mode/No Disc mode, press
the MENU button on the remote control.
Select Channel Add/Delete using the ,&Y
buttons, then press the ENTER or _,- button.
5
Select the channels you want to add or delete on
the "Select channel" screen using the ,&Y or
number buttons. Then, press the ENTER button.
Select Setup using the ,&Y buttons, then press
the ENTER or _,- button.
• Using CH G Q buttons for channel selection allows
the user to add/delete one channel at a time.
• Using Ay buttons for channel selection jumps to
the next channel memorized in Auto Channet
Memory.
Select Audio using the ,&_ buttons, then press
the ENTER or _, button.
6
Select Add or Delete using the _1 _,-buttons,then
press the ENTER button.
• The message 'Channel is added.' or 'Channel is
deleted.' will be displayed in the center of the
screen.
• Continue to add or delete as many channels as you
want to memorize or delete. This can be used to
add channels not stored automatically due to weak
signal strength.
• Press the RETURN button to return to the previous
menu. Press the MENU button to exit the menu.
32 - English