Table of Contents
Advertisement
Setting Up the Parental Control
The Parental Control function works in conjunction with DVDs that have been assigned a
rating - which helps you control the types of DVDs that your family watches.
There are up to 8 rating levels on a disc.
1
1
With the unit in Stop mode, press SETUP button.
The Setup Menu screen appears.
2
Use UP/DOWN to select Parental. Press ENTER.
2
The Parental Control screen appears.
3
Use LEFT/RIGHT to select Yes if you want to use
3
a password. Press ENTER. The Enter Password
screen appears.
4
4
Enter your password. The Re-enter Password
screen appears to confirm the password. Enter
your password again. The Parental Control
screen appears.
5
About the Rating Level ;
5
The Rating Level will work only when Use
Password is set to Yes. To unlock the player,
use LEFT/RIGHT to select No. Use UP/DOWN
to select Rating level. Press ENTER.
- Use UP/DOWN to select the level(e.g. Level 6) and press
ENTER. Discs that contain Level 7 will now not play.
- To cancel the rating level, use LEFT/RIGHT to select No
in Use Password.
6
About the Change Password ;
6
- Use UP/DOWN to select Change Password. The Change
Password screen appears.
- Enter your new password. Re-enter the new password
again.
NOTE
• How to make the SETUP MENU disappear or return to menu screen during set up;
Press RETURN button.
• If you have forgotten your password, see Forget Password in the Troubleshooting Guide.
38
Downloaded From Disc-Player.com Samsung Manuals
e.g Setting up in LEVEL6.
Setting Up the Audio Options
1
1
With the unit in Stop mode, press the SETUP
button.
2
2
Use the UP/DOWN buttons to select AUDIO
OPTIONS. Then press the ENTER button.
3
3
Use the UP/DOWN buttons to select the desired item.
Then press the LEFT/RIGHT buttons.
Digital Output
1. PCM : Converts to PCM(2CH) 48kHz audio.
Select PCM when using the Analog
Audio Outputs.
2. Bitstream : Converts to Dolby Digital Bitstream (5.1CH).
Select Bitstream when using the Digital
Audio Output.
NOTE
• Be sure to select the correct Digital Output or no audio will be heard.
DTS
1. Off : Doesn't output digital signal.
2. On : Outputs DTS Bitstream via digital output only.
Select DTS when connecting to a DTS Decoder.
Dynamic Compression
1. On : To select dynamic compression.
2. Off : To select the standard range.
2X Scan Audio
1. Off : Turns 2X audio off.
Though 2X Scan Audio is ON in the SETUP MENU,
no sound will be heard on discs which are recorded with
LPCM, DTS or MPEG-2 Audio.
2. On : Turns 2X audio on.
NOTE
• How to make the SETUP MENU disappear or return to menu screen during set up; Press RETURN button.
• Manufactured under license from Dolby Laboratories.
"Dolby" and the double-D symbol are trademarks of Dolby Laboratories.
• "DTS" and "DTS Digital Out" are trademarks of Digital Theater Systems, Inc.
39
Advertisement
Table of Contents
