Setting Up The Audio Options - Samsung DVD-P401 Manual

! Up the Audio Options
With the unit in Stop mode, press the SETUPbutton.
7
UsetheUP/DOWNbuttons to select AUDIOOPTIONS.
Thenpress theENTER button.
Usethe UP/DOWN buttonsto selectthe desired item.
Thenpressthe LEFT/RIGHT buttons.
3 Dyn&m_c Compression On
4 2X Scsn Audio Off
O Digital Output
1. PCM : Converts to PCM(2CH) 48kHz audio.
Select PCM when using the Analog
Audio Outputs.
2. Bitstream : Converts to Dolby Digital Bitstream (5.1CH).
Select Bitstream when using the Digital
Audio Output.
_/O[_. Be sure to select the correct Digital Output or
no audio will be heard.
0 DTS
1, On : Outputs DTS Bitstream via digital output
only,
Select DTS when connecting to a DTS Decoder.
2. Off : Doesn't output digital signal.
0 Dynamic Compression
1. On : To select dynamic compression,
2. Off : To select the standard range,
O 2X Scan Audio
11 On : Turns 2X audio on.
2. Off : Turns 2X audio off.
Though 2X Scan Audio is ON in the SETUP MENU,
no sound will be heard on discs which are recorded with
LPCM, DTS or MPEG-2 Audio.
• How to make the SETUP MENU disappear or return to menu screen during set up; Press RETURN button.
• Certain audio features of this product manufactured under a license from Desper Products, Inc.
Spatializer ® and circle-in-square device are trademarks owned by Desper Products, Inc.
• Manufactured under license from Dolby Laboratories. "Dolby" and the double-D symbol are trademarks of
Dolby Laboratories. Confidential unpublished works. _:1992-1997 Dolby Laboratories Inc. All rights
reserved.
• "DTS" and "DTS Digital Out" are trademarks of Digital Theater Systems, Inc.
33