Print-Quality Problems; Using Built-In Troubleshooting Tools - Xerox Phaser 7500DN User Manual

Print-Quality Problems

This section includes:
•

Using Built-in Troubleshooting Tools

• Troubleshooting Print-Quality Problems
Your Phaser 7500 printer is designed to produce consistently high quality prints. If you observe
print-quality problems, use the information on these pages to troubleshoot the problem. For more
information, go online to Xerox Support & Drivers at www.xerox.com/office/7500support.
Caution:
The Xerox warranty, service agreement, or Total Satisfaction Guarantee does not cover
damage caused by using unsupported paper, transparencies, or other specialty media. The Total
Satisfaction Guarantee is available in the United States and Canada. Coverage may vary outside
these areas; please contact your local representative for details.
Note: To enhance print quality, toner cartridge(s) for many equipment models have been designed
to cease functioning at a predetermined point.
Using Built-in Troubleshooting Tools
Your printer contains the following built-in tools to help you diagnose print quality problems as well as
adjust your printer's image quality.
• Printing the Troubleshooting Print Quality Page
• Setting Color Calibration
• Calibrating the Paper Type
• Adjusting the Print Margins
• Selecting Paper Type
Printing the Troubleshooting Print Quality Page
Print this Information Page for more help.
1. Press the Down Arrow button.
2. Select Troubleshooting > Print Quality Problems > Troubleshooting Print Quality Page.
3. Press the OK button to print.
Setting Color Calibration
1. Press the Down Arrow button.
2. Select Troubleshooting > Print Quality Problems > Calibrate Colors.
3. Press the OK button to print.
on page 131
on page 133
on page 131
on page 132
on page 132
on page 132
on page 131
Phaser 7500 Color Printer
Troubleshooting
131
User Guide