Table of Contents
Advertisement
Operations are not possible when messages appear
Problems
"
Updating the des-
tination list...
Please wait. Spec-
ified destina-
tion(s) or
sender's name has
been cleared.
" ap-
pears, and operations are
not possible.
Causes and solutions
The destination list is being updated from the network using
SmartDeviceMonitor for Admin. Depending on the number of
destinations to be updated, there may be some delay before you
can resume operation. Operations are not possible while this mes-
sage is displayed.
Wait until the message disappears. Do not switch off the power
while this message is displayed.
If Your Machine Does Not Operate As You Want
8
91
Advertisement
Table of Contents
