Micr Fonts; Micr Fonts Provided; Postscript Fonts; Pcl Fonts - Xerox DocuPrint 100 User Manual

MICR fonts provided

PostScript fonts

PCL fonts

MICR User Guide

2. MICR fonts

The Xerox-supplied MICR fonts are required to optimize
the quality of the MICR line and ensure excellent
performance. It is critical that the font character raster
patterns and metrics are not modified in any way and that
no new characters are added.
Note: For the Xerox MICR Guarantee to be valid, Xerox
MICR fonts must be used. They may not be modified in
any way.
Xerox provides sets of E13B and CMC7 MICR fonts for
PostScript, PCL, LCDS, and IPDS. The following sections
describe the fonts that you receive.
You receive the following PostScript MICR fonts:
·
E13B9.PFB: 9-point, 600 dpi E13B. This font can be
loaded and viewed on your PC. (Refer to "Loading
MICR fonts on a PC," later in this chapter, for the
procedure.)
·
E13B.PFB: 9.12-point, 600 dpi E13B
·
E13B.PS: 9.12-point, 300 dpi E13B
·
CMC72510.PFB: 9.06-point, 600 dpi CMC7
Notes:
1. Use the 9.12 point, 600 dpi E13B font for compatibility
with 300 dpi data.
2. The E13B.PFB and E13B.PS MICR fonts cannot be
loaded on the printer at the same time. Refer to
"MICR Fonts CD-ROM," later in this chapter, for
further details.
You receive the following PCL fonts, all at 600 dpi
resolution:
· CMC72510.HPP: 9.06-point CMC7
· E13B-609.HPP: 9.12-point E13B
· E13B-P.HPP 9.12-point E13B
2-1