Non-Standard Paper Size - Xerox DocuColor 5252 Administration Manual

Non-Standard Paper Size

D o c u C o l o r 5 2 5 2 S y s t e m A d m i n i s t r a t i o n G u i d e
You can run non-standard sized paper from Tray 3 by entering the
paper size on the Non-Standard Paper Size screen for the tray
being used.
Key point: Be sure to select Non-Standard Size on the top front
of the tray, and use the Paper Weight Indicator at the right side of
the tray to select the paper weight being used.
1
Touch the Non-Standard Size Paper button on the Machine
Defaults 1 screen. The Non-Standard Paper Size screen appears.
2
Touch the desired Paper Tray button on the Non-Standard Paper
Size screen.
3
Use the up or down arrow buttons on the screen to enter the X
and Y dimensions of the paper being used in the tray. The
dimensions shown on the screen above the X and Y boxes
indicate the minimum and maximum sizes you can enter.
4
Touch the Close button to return to the Machine Defaults 1
screen.
5
To use these settings, exit the Tools Mode and ensure that Non-
Standard Size has been selected on the top/front of the tray.
To o l s M o d e
2-47