Non-Standard Paper Size - Xerox DocuColor 7000AP System Administration Manual

1. To o ls M od e

Non-Standard Paper Size

1- 3 2
You can run non-standard sized paper from any paper tray by
entering the paper size on the Non-Standard Paper Size screen
for the tray being used.
KEY POINT: Be sure to select Non-Standard Size on the top front
of the tray, and use the Paper Weight Indicator at the right side of
the tray to select the paper weight being used.
1. Touch the Non-Standard Size Paper button on the Machine
Defaults 1 screen.
2. Touch the desired Paper Tray button on the Non-Standard
Paper Size screen.
3. Use the up or down arrow buttons on the screen to enter the X
and Y dimensions of the paper being used in the tray. The
dimensions shown on the screen above the X and Y boxes
indicate the minimum and maximum sizes you can enter.
4. Touch the Close button to return to the Machine Defaults 1
screen.
5. To use these settings, exit the Tools Mode and ensure that
Non-Standard Size has been selected on the top/front of the
tray.
Do c uC ol o r 7 0 00 A P /8 00 0 A P S y s te m A d mi n i s tr a ti o n G ui d e