Table of Contents
Advertisement
Setting the time of day
The time of day is set in the set time of day
format.
Time
14
13
12
11
10
Set the time of day and confirm your se-
lection with the
OK
Setting the temperature units
Temperature unit
°C
°F
°C
-
Temperature display in Celsius.
°F
-
Temperature display in Fahrenheit.
Select the temperature unit you want and
confirm your selection with the
08:15
32
31
30
29
28
OK
button.
08:15
OK
OK
button.
Setting the water hardness
Your local water authority can give you in-
formation about the water hardness level in
your area.
With varying water hardness, always set the
highest level. If the water hardness fluctu-
ates between, for instance, 8.3 and
17.7 gpg (8 and 17°dH), the water hardness
must be set to 17.7 gpg (17°dH).
The water hardness setting values can be
found in the chart in "Filling the salt con-
tainer".
Water hardness
Set the water hardness.
OK
Press
to save the setting.
It is useful to know your water hardness so
that you can provide the service technician
with this information in the event of any sub-
sequent service calls. Document the water
hardness in "Filling the salt container".
Commissioning
08:15
16
15
14
°dH
13
12
OK
23
Advertisement
Table of Contents
