Table of Contents
Advertisement
Operation
Selecting a program
Choose your program according to the type
of wash items and the degree of soiling.
As soon as you have selected a program,
the LED for the Start/Stop button starts to
flash.
Use the button to return to the program
selection screen before the program starts,
e.g., to select a different program. This is no
longer possible once the program has
started. If necessary, you must cancel the
program (see "Canceling a program").
44
Starting a program
Press the Start/Stop button (the LED of
the Start/Stop button will light up).
Once it has been started, a program can
no longer be changed.
You can interrupt (see "Interrupting a pro-
gram") or cancel (see "Canceling a pro-
gram") the program in progress.
Starting the program using a timer
The start of a program can be delayed; for
example, to benefit from economy rates of
electricity at night. You can set a start time
at which the program should start (
or a finish time by which the program should
Finish at
end at the latest (
based on the set time of day; see "Time of
day".
Setting the timer
Select a program.
Program
AutoOpen
Normal plus
66°C
0:19 h
Timer
Tap on
Timer
to set the timer.
Timer
Finish at
12:30
Start at
Delete
Then select the start (
Finish at
time (
).
Set the time.
Confirm your entries with the
Start at
)
). The times are set
08:15
Dry+
08:15
14
32
13
31
12 30
11
29
10
28
OK
Start at
) or finish
OK
button.
Advertisement
Table of Contents
