Xerox 4050 Installation Planning Manual page 51

Power requirements
XEROX DOCUPRINT 4050/4090 IPS INSTALLATION PLANNING GUIDE
6.
This chapter provides power and space requirements for your
4050/4090 printer. It also provides printer environmental
specifications.
For facts about controller power and space requirements, refer to the
"Controller specifications and requirements" chapter of this guide.
Your DocuPrint system has important power requirements that must
be accommodated. These requirements are summarized in the table
below. For further details on power requirements, refer to the voltage
charts and wiring diagrams that follow.
For details on controller power requirements, refer to the "Controller
specifications and requirements" chapter of this guide.
Table 6-1.
Voltage
120/208 or 120/240 VAC 30 amp
Table 6-2.
Voltage
220, 230, 240 VAC
(3 phase, 4 wire or
single-phase)
Table 6-3.
Voltage
120/208 or 120/240 VAC 30 amp
Table 6-4.
Voltage
220, 230, 240 VAC
Agency certification: UL 478 and 1950, IEC 950, CSA 22.2 #220-
1986, FCC (Class A), and VDE 0871 (Class A).
6Printer specifications and
4050 printer 60 Hz electrical requirements
Amp. service KVA rating
Operating: 4.1
Standby: 2.7
4050 printer 50 Hz DELTA electrical requirements
Amp. service
30 amp
4090 printer 60 Hz electrical requirements
Amp. service KVA rating
Operating: 5.5
4090 printer 50 Hz DELTA electrical requirements
Amp. service
30 amp
requirements
NEMA
14-30R
KVA rating
Operating: 3.8
Standby: 2.5
NEMA
14-30R
KVA rating
Operating: 5.5
6-1