Xerox 4050 Installation Planning Manual page 118

DEFINING THE PRINTER TO THE HOST: TCP/IP ATTACHMENT
Item
description Default
TIMEOUT
TRACE NO
E-10
Table E-5.
Source of Range of
value acceptable values Comments
Installation REDRIVE or STOP REDRIVE: When there is a
preferences
YES or NO
Note: To specify a TCP/IP address space name other than the
default (TCP/IP), code the following EXEC statement in the
appropriate PSF writer procedure:
STEP01 EXEC PGM=APSPPIEP,
PARM=(,,,,tcpip_name), REGION=4096K
where tcp/ip_name is the name of the TCP/IP address space.
If this parameter is not coded, PSF uses the default name,
TCPIP. (For a full description of the PARM parameter, refer to
Print Services Facility/MVS: Diagnosis Guide and
Reference.)
XEROX DOCUPRINT 4050/4090 IPS INSTALLATION PLANNING GUIDE
PSF/MVS PRINTDEV statement parameters
(continued)
time-out after period
specified in DISCINTV
parameter, REDRIVE
requests that PSF attempt
to drive the printer
according to MGMTMODE
specification.
STOP: Forces operator to
restart FSA.
Note: REDRIVE is
recommended for TCP/IP
printers that may be shared
with other hosts.
Should be used only for
debugging PSF-related
problems.
Your value