Xerox 4050 Installation Planning Manual page 117

Item
description Default
PIMSG (YES,16) Installation
PORTNO 5001
PSEGDD None
SETUP No Setup
messages
issued
RELINTV
RELMODE None
XEROX DOCUPRINT 4050/4090 IPS INSTALLATION PLANNING GUIDE
Table E-5.
Source of Range of
value acceptable values Comments
(YES,nnn) or
preferences (NO,nnn)
Xerox IPS Valid TCP/IP port
Interface number between
windows 5001 and 32767
Installation SETUP=FORMS if
preferences specified
IDLE, TIME, or
NONE
DEFINING THE PRINTER TO THE HOST: TCP/IP ATTACHMENT
PSF/MVS PRINTDEV statement parameters
(continued)
YES: Specifies error
messages are always
printed.
nnn: Specifies maximum
number of messages
groups generated before
job is purged from spool. A
value of 0 causes printer to
print continuously,
regardless of number of
errors.
Applicable only to TCP/IP
printers. (Ensure the
chosen port number is not
in TCP/IP list of reserved
port numbers.)
Name of Page Segment
library DD statement. For
best results, the images in
page segments in this
library should match the
resolution the IPS printer is
using.
If specified, causes JES to
issue FORMS setup
message when a job prints
which has a FORMS
specification different from
job previously printed. This
is recommended where
there are multiple paper
stocks for use on the IPS
printer.
Not applicable to Xerox cut-
sheet printers
Not applicable to Xerox cut-
sheet printers
Your value
E-9