Removing The Shipping Screw - Xerox WorkCentre XE80 User Manual

Removing the Shipping Screw

DO NOT FORCE THE
DOCUMENT COVER.
THE WORKCENTRE WILL
MALFUNCTION IF THE
SHIPPING SCREW IS NOT
REMOVED.
1. Remove the shipping screw.
2. Lift the document cover so that the left
hinge separates. Remove the
restraining strip and reconnect the
document cover to the WorkCentre.
3. Open the front door by pushing in on
the front door latches on each side of
the front door.
4. Place the shipping screw in a hole
of the plastic shield in the right side
of the front door. It must be
reinserted when repacking or moving
the WorkCentre.
3