Table of Contents
Advertisement
en Meat probe
Thin
Insert the meat probe into the thickest
pieces
part of the meat from the side.
of meat
Thick
Insert the meat probe diagonally into the
pieces
meat from above, pushing it in as far as
of meat
possible.
Poultry
Insert the meat probe into the thickest
part of the breast, pushing it in as far as
possible. The meat probe can be inser-
ted horizontally or vertically depending
on the size and shape of the poultry.
Turn the poultry and place it on the wire
rack breast-side down.
Fish
When cooking whole fish, insert the
meat probe behind the fish's head in the
direction of the spine, pushing it in as
far as possible.
Place the fish on the wire rack in the
swimming position without turning it,
e.g. using half a potato as a support.
2.
Place the food with the meat probe into the cooking
compartment.
3.
Plug the meat probe into the socket on the left-hand
side of the cooking compartment.
Notes
¡ If you remove the meat probe while the food is
cooking, all the settings will be reset.
¡ Do not remove the meat probe when turning the
food. Once you have turned the food, check that the
meat probe is correctly positioned in the food.
24
13.3 Setting the meat thermometer
The roasting sensor measures the temperature inside
the food between 30 °C and 99 °C.
Requirements
¡ The food with the roasting sensor is in the cooking
compartment.
¡ The roasting sensor is inserted in the cooking com-
partment.
1.
In the operating modes menu, select "Types of heat-
ing", "Microwave combination", "Dishes" or "Steam".
2.
Press the core temperature
In the "Dishes" operating modes menu, set the core
temperature under "Adjust".
3.
Use the rotary selector to set the core temperature.
Set the cooking compartment temperature at least
10 °C higher than the core temperature.
Do not set the cooking compartment temperature to
higher than 250 °C.
4.
Press
to start the operation.
a The appliance starts heating.
a The time, the operation duration and the settings are
shown in the display.
a The required temperature and core temperature are
in the centre and to the right of the display. The cur-
rent temperature or core temperature is shown on
the progress line under the focused value. Press
to display the exact core temperature.
a Once the dish is ready, a signal sounds. The appli-
ance stops heating. A notification appears on the
display.
5.
WARNING ‒ Risk of burns!
The cooking compartment, accessories and meat
probe become very hot.
▶
Always use oven gloves to remove hot accessor-
ies and the meat probe from the cooking com-
partment.
When the core temperature is reached:
Press
to switch the appliance off.
‒
Remove the roasting sensor from the socket in
‒
the cooking compartment.
Remove the roasting sensor from the food and
‒
take it out of the cooking compartment.
Changing the temperature
Once the operation has started, you can change the
temperature directly.
1.
Use the rotary selector to change the temperature.
a The temperature is applied immediately.
2.
To change the core temperature, press
the rotary selector to change the value.
a The core temperature is applied immediately.
Changing the temperature for dishes
Once the operation has started, you can change the
temperature.
1.
Press
.
2.
Press "Adjust".
3.
Use the rotary selector to set the cooking compart-
ment temperature.
4.
Press the core temperature
5.
Use the rotary selector to adjust the core temperat-
ure.
6.
Press
.
a The operation continues.
in the various menus.
and use
.
Advertisement
Table of Contents
