Rails - Siemens CN878G4 6 Series User Manual And Installation Instructions

Table of Contents

Advertisement

3.
Push the left- and right-hand retainer
until the intermediate pane is clamped  ​ ⁠ .
4.
Attach the front pane downwards into the left- and
right-hand retainers
5.
Push the front pane to the appliance until the left-
and right-hand hook
25  Rails
To thoroughly clean the rails and the cooking compart-
ment, or to replace the rails, you can remove the rails.
25.1 Detaching the rails
WARNING ‒ Risk of burns!
The shelf supports get very hot
Never touch the shelf supports when hot.
Always allow the appliance to cool down.
Keep children at a safe distance.
1.
Pull out the pull-out forwards.
2.
Lift the rail forwards slightly
3.
Swivel the entire rail outwards
the rear
​ ⁠ .
​ ⁠ downwards
​ ⁠
​ ⁠ .
​ ⁠ is opposite the support
​ ⁠ and detach it
​ ⁠ and unhook it at
6.
Push the front pane in at the bottom
hear it click into place.
7.
Open the appliance door slightly and remove the
tea towel.
8.
Screw both screws back in on the left and right of
the appliance door.
9.
Put the door cover in position and push down on it
​ ⁠ until you hear it click into place.
​ ⁠
​ ⁠ .
10.
Close the appliance door.
Note: Do not use the cooking compartment again until
the door panes have been correctly fitted.
25.2 Fitting the retainers
The retainers may fall out when you detach the rails.
Note:
The retainers at the front differ from those at the rear.
​ ⁠ .
1.
Hook the front retainers with the hook into the round
hole at the top and set them at a slight angle
Rails en
​ ⁠ until you
​ ⁠ .
37

Advertisement

Table of Contents
loading

Table of Contents