Table of Contents
Advertisement
en Familiarising yourself with your appliance
Countdown
You can view the countdown time or the cooking time
for the previous operation in the top right in the status
bar.
If you have set a cooking time and the cooking time is
deleted, the countdown time takes over from the time
that has already elapsed from the cooking time. You
can therefore always check how long the operation has
already been running.
The heating line does not appear when using the mi-
crowave.
Temperature display
The heating-up control and the residual heat indicator
show you the temperature in the cooking compartment.
Symbols
Different symbols may appear on the display.
Symbol
4.5 Cooking compartment
The functions in the cooking compartment make your
appliance easier to use.
Shelf supports
The rails in the cooking compartment enable you to
place accessories at different heights.
→ "Accessories", Page 13
Your appliance has three shelf positions. The shelf pos-
itions are numbered from bottom to top.
The rails are equipped with pull-out rails on one or
more levels, depending on the appliance type.
10
Due to thermal inertia, the temperature that is displayed
may differ slightly from the actual temperature inside
the cooking compartment. You can use the
to check the current temperature.
¡ Heating-up control
¡ Residual heat indicator
Name
Home Connect
Home network
Home Connect server
Remote start
Remote diagnostics
You can remove the rails, e.g. for cleaning.
→ "Rails", Page 37
Lighting
One or more oven lights illuminate the cooking com-
partment.
When you open the appliance door, the light in the
cooking compartment switches on. If the appliance
door remains open for longer than 15 minutes, the light
switches off again.
After the operation starts, the heating-up indicator
displays the rising temperature in the cooking com-
partment. When you are preheating the appliance,
the optimal time to place your food in the cooking
compartment is as soon as all the bars are filled.
For set levels, e.g. for grill settings, the heating-up
indicator is not displayed.
When the appliance is switched off, the display
shows the residual heat in the cooking compart-
ment. The residual heat indicator goes out at ap-
prox. 60 °C.
Use
¡ Home network and Home Con-
nect server connected
¡ The number of lines shows the
signal strength of the home net-
work
→ "Home Connect ", Page 28
Home network not connected
→ "Home Connect ", Page 28
Home Connect server not connected
→ "Home Connect ", Page 28
Remote start activated
→ "Home Connect ", Page 28
Remote diagnostics activated
→ "Home Connect ", Page 28
button
Advertisement
Table of Contents
