Set The Telephone Number For Data Forwarding; Output Tray Setting; Anti Junk Fax Setting - Xerox WorkCentre C226 System Administration Manual

Fax Unit
6-60

Set the telephone number for data forwarding

When a problem prevents the machine from printing a received fax, the transfer func-
tion can be used to forward the received fax to another fax machine. Use this setting to
program the fax number of the destination fax machine. Only one fax number can be
programmed (maximum of 64 digits).
If you wish to specify an F-code confidential memory box in the destination machine,
touch the [SUB ADDRESS] key after entering the fax number to enter a slash "/", and
then enter the sub-address. Enter a passcode as well if needed. (See "Storing One-
Touch Keys" in your Xerox WorkCentre C226 User Guide.)

Output tray setting

This setting is used to select the output tray for received faxes. The trays that can be
selected will vary depending on what peripheral devices have been installed.

Anti junk fax setting

This program is used to enter fax numbers from which you wish to block fax reception.
Up to 50 numbers can be entered.
This program is normally disabled.
To block reception from the entered fax numbers, touch the [VALID] key.
Entering anti junk fax numbers
1. Touch the [ENTER] key.
The fax number entry screen appears.
Key Operator Programs
Anti Junk Fax Setting
Enter
Delete
2. Enter the fax number with the numeric keys.
Up to 20 digits can be entered.
When you have finished entering the number, touch the [NEXT] key to store the
number. A new number entry screen will appear. Enter the next number with the
numeric keys.
3. Touch the [OK] key.
Deleting an anti junk fax number
1. Touch the [DELETE] key.
The deletion screen will appear.
2. Touch the number key that you wish to delete.
A message will appear. Touch the [YES] key to delete the number.
To cancel the deletion, touch the [NO] key.
Xerox WorkCentre C226 System Administration Guide