Xerox WorkCentre C226 Quick Start Manual page 24

To Install the software in Windows 95/98/Me or Windows NT 4.0/
7
2000 (Parallel interface)
Page 26
Click the [Custom installation] button.
Click [Connected to this computer], then click [Next].
Select the [Parallel] interface and click [Next].
Select [LPT1] for the printer port, and click [Next].
Select the model you are using and click [Next].
Check the contents of the window and click [Next].
Select the printer driver being installed as the default printer and click [Next].
Enter the desired printer name and click [Next].
Select the display font, and click [Next].
Follow the on-screen instructions to install the printer driver. When the finish
setup window appears, click [OK].
When the finish installation window appears, click [Close].
When the message "Now connect the interface cable to the PC" appears, click
[OK].
Turn off both the machine power and the computer power and then connect the
parallel cable. Turn the machine power on first and then turn on your computer.
Xerox WorkCentre C226 Quick Start Guide