Xerox WorkCentre C226 Quick Start Manual page 18

Insert the CD
1
Insert the WorkCentre C226 PCL Print Drivers and Printer/Network Setting
Utilities CD into your CD drive.
If the CD does not start automatically, go to the Start menu, select [Run] and
browse to the CD drive. Select [Setup] and click [OK] or [Open] to start the
installation procedure.
Make sure you understand the contents of the licence agreement, then click
[Next].
Do one of the following install procedures to perform a standard or custom
installation.
Page 20 Xerox WorkCentre C226 Quick Start Guide