Xerox WorkCentre C226 Quick Start Manual page 22

To Install the software in Windows XP/Server 2003
5
(USB/parallel interface)
Page 24
Click the [Custom installation] button.
Click [Connected to this computer], then click [Next].
Select the display font, and click [Next].
Follow the on-screen instructions to install the printer driver. When the finish
setup window appears, click [OK].
Click [Close].
When the message "Now connect the interface cable to the PC" appears, click
[OK].
Connect the machine to your computer with an interface cable.
For a USB cable, make sure the machine power is turned on then connect the
cable.
For a parallel cable, turn off both the machine power and the computer power,
then connect the cable. Turn the machine power on first then turn on your
computer.
In the "Found New Hardware Wizard" select "Install the software automatically
(Recommended)" and click [Next]. Follow the on-screen instructions to install the
printer driver.
Xerox WorkCentre C226 Quick Start Guide