Warranty - Eaton 93E15KMBSB User And Installation Manual

5 Warranty

The product is warranted against defects in materials and workmanship for a period of twelve
(12) months from its original date of purchase. The local office or distributor may grant a warranty
period different to the above. Please refer to local terms of liability as defined in the supply
contract.
The UPS manufacturer is not responsible for

Any costs resulting from a failure if the installation, commissioning, repair, alternation, or
ambient conditions of the equipment do not fulfil the requirements specified in the
documentation delivered with the unit and other relevant documentation.

Equipment subjected to misuse, negligence or accident.

Equipment comprised of materials provided or designs stipulated by the purchaser.
The warranty is only valid if the installation inspection and initial start-up of the UPS unit is
carried out by a service engineer approved by Eaton. Service and maintenance of the UPS
shall also be performed only by a service engineer approved by Eaton. Otherwise the
warranty will be voided.
If the product fails to meet its published specifications due to a defect in material and
workmanship, covered by this warranty, the seller will repair or replace the warranted product.
Such repair or replacement will be made by Eaton or by a service provider approved by Eaton.
Repair or replacement during the warranty period does not extend the original warranty. Warranty
does not cover taxes, which will be due in connection with replacement or repair of the product.
Batteries are warranted against failures in material and workmanship, not against the normal aging
and reduction of ampere-hour capacity. The product storage environment has to meet
manufacturer's specifications, failure to do this will cause the warranty to be voided.
Under no circumstances shall the manufacturer, its suppliers or subcontractors be liable for
special, indirect, incidental or consequential damages, losses or penalties.
The technical data, information and specifications are valid at the time of printing. The UPS
manufacturer reserves the right to modifications without prior notice.
P-164000427
Revision 2
SMALL and LARGE BATTERY CABINET
User's and Installation Guide
19