Switching on the
Printer and the
Controller
(PUN, YKE, YKE-N,
and FRX
controllers)
XEROX WIDE FORMAT COPY SYSTEM
NOTE: Ensure that the Scan System is switched on first and the P is
displayed in the Status Indicator window before powering on the
Controller.
The PUN controller and the FreeFlow Accxes Print Servers (YKE, FRX
and YKE-N controllers) each has its own power switch.
When powering them on:
1. Power on the Printer.
2. Power on the Scan System.
3. Wait for the "P" to be displayed in the Status Indicator window of the
Scan System.
4. Power on the Controller.
Getting to know the WIDE FORMAT COPY SYSTEM • 27
Power Switch location on the
YKE-N and FRX Controller.