Maintenance Information; Ozone Safety Information; For Consumables - Xerox 6030 User Manual

XEROX WIDE FORMAT COPY SYSTEM
-
Never operate the equipment if you notice unusual noises or odors.
Disconnect the power cord from the electrical outlet and contact your
local Xerox/Fuji Xerox Service Representative or Service Provider
immediately.

Maintenance Information

Do not attempt any maintenance procedure that is not specifically
described in the documentation that is supplied with your copier/printer.
-
Do not use aerosol cleaners.
approved may cause poor performance of the equipment, and could
create a dangerous condition.
-
Use supplies and cleaning materials only as directed in this manual.
Keep all of these materials out of the reach of children.
-
Do not remove covers or guards that are fastened with screws.
There are no parts behind these covers that you can maintain or
service.
-
Do not perform any maintenance procedures unless you have been
trained to do them by an Authorized Local Dealer or unless a
procedure is specifically described in the user manuals.

Ozone Safety Information

This product will produce ozone during normal operation. The ozone
produced is heavier than air and is dependent on copy volume.
Providing the correct environmental parameters as specified in the Xerox
installation procedure will ensure that the concentration levels meet safe
limits.
If you need additional information about ozone, please request the Xerox
publication Ozone by calling 1-800-828-6571 in the United States and
Canada. In other markets please contact your Authorized Local Dealer
or Service Provider.

For Consumables

Store all consumables in accordance with the instructions given on the
package or container.
○ Keep all consumables away from the reach of children.
○ Never throw toner, toner cartridges, or toner containers into an open
flame
The use of cleaners that are not
Safety Notes • xi