Go To The Printer And - Xerox Document Centre 460 Installation And Troubleshooting Manual

NOTE ALL Print Servers you create must have a password. When your
printer will service queues on multiple fileservers, the Print Server
name must be the same on all fileservers and the Print Server
password must be the same on all fileservers.

Go to the printer and...

1.
2.
3.
4.
5.
Page 5 - 2
Connect your Document Centre to your network with the
appropriate cabling.
Enter the Tools pathway
a) Press the Access ( ) button.
b) On the keypad enter 1111 or the current password. Press
the Enter button when finished. Press the Go to Tools
button.
c) The Touch Screen will be used for the remainder of the
data entry.
Enable the Network Protocol.
a) Press the Connectivity and Network Setup button.
b) Wait for the screen to refresh and press the Network
Setup button.
c) Press the NetWare button.
d) Wait for the screen to refresh and press the Protocol and
Media button.
e) Press the Enable button. If Physical Media buttons
appear, select either Ethernet or Token Ring. Press
Save.
Set the Frame Type
a) Press the Frame Type button.
b) Select the frame type desired then press Save to retain
your changes and exit to the NetWare Options screen.
Set the NDS Settings
Xerox Document Centre Network Installation & Troubleshooting Guide