Step 3: Network Setup
Protocols and Services Installed
Network Virtual Printers - Print Queues
Step 3: Network Setup
TCP/IP Setup
The table below describes the default protocols and services installed on
the system.
Parameter
Client for Microsoft Networks
File and Printer Sharing for Microsoft
Networks
NetBEUI Protocol
NWLink BetBIOS
NWLink IPX/SPX/NetBIOS Compatible
Transport Protocol
Network Monitor Driver
Internet Protocol (TCP/IP)
AppleTalk Protocol
The table below describes the default virtual printers which are available
from the Macintosh and PC clients.
Network Virtual Printers - Print Queues <hostname>_ProcessPrint
The following should only be performed if you need to change the default
settings (see Step 2 for the default settings).
In the Spire CX260 workspace, select
1.
In the
2.
Network Setup
area.
<hostname>_ProcessStore
<hostname>_SpoolStore
Tools > Settings
parameter, click
Change Settings
7
Default Setting
Enabled
Enabled
Enabled
Enabled
Enabled
Enabled
Enabled: DHCP Yes
Enabled
.
in the TCP/IP