Table of Contents
Advertisement
Using CentreWare Internet
Services
If you are using a Document Centre ColorSeries 50 copier/printer, you can use
CentreWare Internet Services to print a print-ready PostScript file and to access Finisher
information. The System Administrator can also use CentreWare Internet Services to
change the default setting for the out-of-staple condition.
NOTE: For complete information about accessing CentreWare Internet Services and
printing PostScript files, refer to the Xerox Document Centre ColorSeries 50 Digital
Copier/Printer Printer User Guide.
Checking the device profile information
CentreWare Internet Services provides device profile information about your Document
Center ColorSeries 50 copier/printer. Using CentreWare Internet Services, you can easily
determine whether the copier/printer has a Finisher installed and how the Finisher has
been configured.
To check the device profile information:
1
Access the Document Centre ColorSeries 50 CentreWare Internet Services Home
Page.
2
Click Properties. The properties tab is displayed.
3
In the Properties listing, click Portfolio.
4
In the Portfolio listing, scroll to Device Profile and click on it. The Device Profile infor-
mation is displayed.
5
Verify the Finisher settings in the Installed Options box.
•
If Finisher Configured indicates Yes, the copier/printer has a Finisher installed. If it indicates
No, the copier/printer does not have a Finisher installed.
•
If Mailbox Configured indicates Yes, the Finisher has been configured as a Finisher/Mailbox. If
it indicates No, the Finisher has been configured as a Finisher/Sorter.
IN-LINE STAPLER FINISHER USER GUIDE
15
Advertisement
Table of Contents
