Appletalk Setup; Ipx And Novell Client Setup - Xerox DocuColor 252 Quick Connect Manual

8

AppleTalk Setup

IPX and Novell Client Setup

Select
3. Use the following IP Address
Type the new
4. IP address
(according to the Network Administrator).
If required, enter the DNS server addresses (according to the Network
5.
Administrator).
Click .
6. OK
Click in the Local Area Connections Properties window.
7. OK
When prompted to restart your computer, click
8.
The following should only be performed if you need to change the default
settings (see Step 2 for the default settings).
In the Spire CX260 workspace, select
1.
In the
2. Network Setup
Talk setup area.
The AppleTalk Protocol Properties window appears.
From the zone list, select the desired AppleTalk zone for your
3.
computer, and click
Note: For more detailed information, see the Creo Color Server for the Xerox
DocuColor 242/252/260 Printer/Copier Technical Manual (document number
731-01024A-EN) or the Creo Color Server for the Xerox DocuColor 242/252/260
Printer/Copier User Guide (document number 731-01023A-EN).
The following procedures are relevant for those customers who have a
Novell® network running IPX protocol.
Installing Novell Client on the Spire CX260
Close the Spire CX260 software.
1.
Close all other open applications.
2.
On the Windows desktop, click
3.
Novell Client Installation
Click ; then click
4. Install
.
, and
Subnet mask
Tools > Settings
parameter, click
Change Settings
.
OK
and select
Start
.
.
Reboot
Quick Connect Guide
Default gateway
.
Yes
.
in the Apple
CX260 > CX260 Tools >