Follett Champion 7 Installation Manual page 18

5. Unscrew the chute (Fig. 21).
6. Remove the one screw securing the front cover (Fig. 22).
7.
Remove the front cover and set aside. Follett recommends setting
the cover on the drip tray, which provides a stable base (Fig. 23).
Be careful not to stretch or damage any cables connecting the front
cover to the unit.
8. Remove plug cap from end of drain tube and lower tube to drain
water into bucket (Fig. 24). After the system has been drained of
water, replace plug cap in drain tube and secure tube in holder.
9. Rear drain units: Locate the storage bin drain tube pinch clamp and
engage (close) (Fig. 25).
18 Champion Dispenser and Ice Machine - 115 V
Fig. 21
Fig. 22
Fig. 23
Fig. 24
Fig. 25