Follett Champion 7 Installation Manual page 12

4. Install the angle bracket inside the cabinet,18.15" (46.1 cm) from the
toe kick (Fig. 8.1). The bracket prevents the dispenser from being
located/pushed beyond the recommended cabinet space depth. Do
not attach the bracket to the dispenser.
Potable Water Connection
1. Do not supply power to the unit until after the Initial Sanitizing
Procedure has been completed. This ensures that the evaporator
is warm and does not contain ice.
2. Connect water line. Recommended routing (Fig. 9) allows easy
access to water for cleaning and sanitizing procedure.
3. Sanitize the dispenser prior to use (locate the Initial Sanitizing
Kit shipped with this unit and complete the Initial Sanitizing
Procedure section.
4. If the dispenser has the optional internal water filter*, ensure that
you also complete the Internal Claris Filter Flushing Sequence
section before putting the unit into service.
* If your dispenser has the internal water filter option, the water filter must be
installed for the dispenser to operate.
12 Champion Dispenser and Ice Machine - 115 V
Fig. 8
1
18.15" (46.1 cm)
Fig. 9
3' (91.4 cm)
Plug
Valve
Water Inlet