Table of Contents
Advertisement
7 Advanced Settings
[Audit Log Settings]
You can configure the settings for recording audit logs in the device and the settings for
Syslog (for sending audit logs to other computers on the network using Syslog protocol).
The audit log is a record which logs entries such as what operations were done by whom
and at what time. Using the audit log feature helps with observations of any unauthorized
use or access attempt.
Note
To retrieve audit logs, use CentreWare Internet Services. For details, refer to the help of CentreWare Internet
Services.
Reference
For details on contents recorded in audit logs, refer to "Audit Log Reference Guide" provided on our official
website.
[Record Audit Log]
To record audit logs, select [Enabled].
When the audit log feature is enabled, audit logs are recorded in the device.
Up to 15,000 logs are recorded in the device, and when the logs exceed 15,000, they will be
deleted in order of the old date.
[Send Audit Log to Syslog Server]
To send audit logs to the syslog server, select [Enabled].
[Syslog Server Name/Address]
Enter a syslog server name or IP address.
[Syslog UDP/TCP Port Number]
Enter the UDP or TCP port number of the syslog server.
[Syslog TLS Port Number]
Enter the TLS port number of the syslog server.
[Syslog Transport Protocol]
Set the transport protocol to send to the syslog server.
[Syslog Facility]
Enter the facility number of the audit log to send to the syslog server.
[Syslog Timeout Value]
Enter an operation time-out value for syslog delivery.
[When Send Error Occurs]
Set up the operation when the audit logs recorded in the device which are undelivered to
the syslog server reached its maximum value.
[Prioritize Device Operation]
Overwrites from the older logs. You cannot perform the Syslog send for the overwritten
audit logs.
176
Advertisement
Table of Contents
