Cleaning - Stihl FSA 30.0 Instruction Manual

English
15.2 Storing the blades
Up to 6 blades can be stored directly on the
brushcutter.
► Attach a blade (1) to the underside of the
brushcutter.
► Push the tip of the blade (1) into the opening
(2) in the brushcutter.
► Fit the next blade on top of the first and so on.
15.3 Storing the Battery
STIHL recommends keeping the battery in a
charging state between 40% and 60 % (2 green
LEDs lit).
► The battery should be stored in such a way
that the following conditions are fulfilled:
– The battery is out of the reach of children.
– The battery is clean and dry.
– The battery is in an enclosed space.
– The battery is separated from the brushcut‐
ter.
– If the battery is stored in the charger, dis‐
connect the mains plug and store the bat‐
tery at a state of charge between 40% and
60% (2 lit green LEDs).
– Do not store the battery outside of the
specified temperature limits,
NOTICE
■ If the battery is not stored as described in this
User Manual, the battery may become deeply
discharged and irreparably damaged.
► Charge a discharged battery before storing
it. STIHL recommends keeping the battery
state of charge between 40% and 60% (2 lit
green LEDs).
► Store the battery separately from the brush‐
cutter.
15.4 Storing the Charger
► Disconnect the mains plug from the power
supply.
18
1
► Wind up the connecting cable and attach it to
1 2
the charger.
► Observe the following points when storing the
charger:
– Charger is out of the reach of children.
– The charger is clean and dry.
– Charger is in an enclosed space.
– The charger is not suspended from the con‐
– Do not store the charger outside of the

16 Cleaning

16.1
► Switch off the brushcutter and remove the bat‐
tery.
► Clean the brushcutter with a damp cloth.
► Remove foreign objects from the battery com‐
partment and clean the battery compartment
with a damp cloth.
► Clean the electrical contacts in the battery
compartment with a paintbrush or soft brush.
► Clean the area underneath the fanwheel with
a soft brush.
20.5.
16.2
► Switch off the trimmer and remove the battery.
► Clean the deflector and cutting attachment
with a damp cloth or a soft brush.
16.3
► Clean the battery with a damp cloth.
16.4
► Disconnect the mains plug from the power
supply.
► Clean the charger with a damp cloth.
► Clean the charger's electrical contacts with a
paintbrush or a soft brush.
necting cable or the holder (3) for the con‐
necting cable.
specified temperature limits,
Cleaning the Brushcutter
Cleaning the Deflector and Cut‐
ting Attachment
Cleaning the Battery
Cleaning the Charger
16 Cleaning
2
3
20.5.
0458-039-0101-A