Table of Contents
Advertisement
the sides to be cleaned more easily.
A = front housing
B = rear pin
In some models, the rear pin B
can be removed and re-
assembled in the same way as
the front housing A.
To remove the rack/tray support frames:
1. Unscrew the front fixing pin located on the
side wall near the opening of the oven
cavity (you can help yourself with a tool,
e.g. a coin).
2. Carefully pull the frame towards the inside of
the oven cavity to unhook it from front
housing A.
122 - CLEANING AND MAINTENANCE
3. Remove the frame from the rear pin B
located at the bottom of the side wall.
4. Repeat the operation for the frame placed
on the other side wall.
To refit the rack/tray support frames:
1. Slide the rear part of the frame into the
housing under the pin B located at the
bottom of the side wall.
2. Replace the front part of the frame in
housing A on the side wall near the opening
of the oven cavity.
914779546/D
Advertisement
Table of Contents
