Smeg SO6606WAPNR Manual page 28

• To remove the loading wand, press on the
front of the wand until the spring contracts,
then release.
• Touch the WAND button
display (positioned in the lower area
Pay attention to the distance to be
maintained so as not to be hit by the
wand projection.
5. Place the end of the tube at the bottom of
the jug (or container).
6. Press the start
appliance reservoir with water.
The appliance will automatically draw
the quantity of water necessary for
cooking on the basis of the set duration.
914779546/D
fig. 1
or
on the
button to start filling the
In the event that the water runs out, the
appliance will automatically stop the
cooking process, a buzzer will sound
and the display will show a request to
fill the reservoir with water.
7. When finished, shake the loading wand to
remove any water residue.
).
8. Place the loading wand back in its holder.
9. Remove the jug (or container).
10. Close the door.
When the door is closed, an automatic
system will automatically draw in any
residual water in the loading wand to
avoid drips. A bubbling noise may be
heard; this is completely normal.
11. Touch the CONFIRM
that you have finished filling the reservoir.
The appliance starts the function using the
parameters set.
Each time the door is opened, the
function in progress will stop and then
automatically restart when the door is
closed again.
Preheating stage
Cooking itself is preceded by a preheating
stage, which allows the appliance to heat to the
cooking temperature more quickly.
This stage is indicated by a progressive increase
button to confirm
USE - 97