Table of Contents
Advertisement
7. Touch the STEAM LEVEL
relevant value.
8. Scroll through the values and select the
required steam level.
The steam level that can be selected
depends on the set cooking duration:
Level 1: always available;
Level 2: 30 minutes and upwards;
Level 3: 45 minutes and upwards.
With the MANUAL steam level
selection, injections of steam can be
introduced as wished with the
button during cooking.
Injections of steam are active as long as
the indicator light
duration of approx. 8 minutes).
9. Touch the CONFIRM
the steam level that has been selected.
10. Touch the COOKING DURATION
button or the relevant value.
11. Scroll through the values and select the
required duration.
The hours and minutes can be selected
separately.
104 - USE
button or the
is flashing (for a
button to confirm
The duration of the combined steam
function can be from a minimum of 1
minute to a maximum of 12 hours and
59 minutes.
The expected time for the end of
cooking is shown under the duration;
the minutes needed for preheating are
already calculated.
12. Touch the CONFIRM
the selected cooking duration.
13. Touch the START
right
) to start the reservoir filling
procedure.
14. Proceed with reservoir filling as described
above.
Preheating stage
Cooking itself is preceded by a preheating
stage, which allows the appliance to heat to the
cooking temperature more quickly.
This stage is indicated by a progressive increase
in the temperature level reached.
Unless otherwise indicated in the
recipe, it is not recommended to place
food in the oven during the preheating
stage.
You can skip the pre-heating stage
touching the dedicated button
After pre-heating, a buzzer will sound and a
message will appear on the display to indicate
that the dish can be put in the oven cavity.
Cooking phase
1. Open the door
2. Place the dish with the food to be cooked
into the oven cavity.
button to confirm
button (at the lower
.
914779546/D
Advertisement
Table of Contents
