Table of Contents
Advertisement
8. Place the end of the tube at the bottom of
the jug (or container).
9. Press the start
appliance reservoir with water.
10. When finished, shake the loading wand to
remove any water residue.
11. Place the loading wand back in its holder.
12. Remove the jug (or container).
13. Close the door.
When the door is closed, an automatic
system will automatically draw in any
residual water in the loading wand to
avoid drips. A bubbling noise may be
heard; this is completely normal.
116 - USE
button to start filling the
14. Touch the CONFIRM
that you have finished filling the reservoir.
Manual reservoir draining
Function for draining water (or other
liquids) from the reservoir.
1. Touch the OTHER FUNCTIONS
button on the "main menu" (in the main area
).
2. Touch the sub-menu
the lower area
3. Touch the RESERVOIR DRAIN
button.
4. Place a jug or container on the open door.
5. Remove the loading wand from its holder.
6. Press the START
the water into the jug (or container).
When complete, the display will indicate that
the residual water removal process is complete.
7. Touch the CONFIRM
8. Shake the loading wand in order to remove
any remaining water.
9. Place the loading wand back in its holder.
10. Remove the jug (or container).
11. Close the door.
For the cleaning function VAPOR CLEAN
(only on some models) and the cleaning
functions of the sub-menu
CLEANING AND MAINTENANCE.
button to confirm
button (located in
).
button to start draining
button.
, see the chapter
914779546/D
Advertisement
Table of Contents
