Connecting Analog Output Signals - National Instruments PXI-6070E User Manual

Chapter 3 Analog Output

Connecting Analog Output Signals

Note
Not all E Series devices use the external reference signal. Refer to the specifications
document for your device.
E Series User Manual
The AO signals are AO 0, AO 1, and AO GND. AO 0 is the voltage output
signal for AO channel 0. AO 1 is the voltage output signal for
AO channel 1.
AO GND is the ground reference signal for both AO channels and the
external reference signal. Figure 3-4 shows how to make AO connections
to the device.
V OUT
Load
Load
V OUT
I/O Connector
Figure 3-4. Analog Output Connections
AO 0
+
–
AO GND
AO 1
Analog Output Channels
E Series Device
3-8
Channel 0
Channel 1
ni.com