Table of Contents
Advertisement
Note
The BNC version of the DAQPad-6020E has a 30-pin I/O connector.
Model
DAQPad-6020E Half-Size
DAQPad-6020E Full-Size
DAQPad-6020E BNC
Note
The DAQPad-6020E devices are compatible with Traditional NI-DAQ (Legacy)
only.
© National Instruments Corporation
Because the DAQPad-6020E has no DIP switches, jumpers, or
potentiometers, you can easily configure and calibrate it through software.
There are three versions of the DAQPad-6020E offering different I/O
connectivity and form factors. These versions are illustrated in Table A-3.
Table A-3. DAQPad-6020E Versions
I/O Connector
68-pin SCSI-II Male
68-pin SCSI-II Male
BNC and removable screw
terminals
Appendix A
Half-size box
(5.8 in. × 8.4 in. × 1.5 in.)
Desktop use
Full-size box
(12.1 in. × 10 in. × 1.7 in.)
Rack-mountable, stackable
Full-size box
(12.1 in. × 10 in. × 1.7 in.)
Rack-mountable, stackable
A-25
Device-Specific Information
Form Factor
E Series User Manual
Advertisement
Table of Contents
