Table of Contents
Advertisement
MaiNTeNaNCe
Maintenance
read section titled "safety Warnings" before using tool.
All screws should be kept tight. Loose screws result in unsafe operation and parts breakage.
With tool disconnected, make daily inspection to assure free movement of trigger. Do not use tool if trigger sticks or
binds.
Wipe tool clean daily and inspect for wear. Use non-flammable cleaning solutions only if necessary–DO NOT sOaK
Caution: Such solutions may damage O-rings and other tool parts.
No routine oiling necessary.
repairs other than those described here should be performed only by trained, qualified personnel. Contact seNCO
for information at 1-800-543-4596.
11
Advertisement
Table of Contents
