Table of Contents
Advertisement
BATTERY CHARGER LABEL REFERENCE
MODE
Standby
Evaluate
Charging
80% Charge
Fully Charged
Maintenance
Defective
Maintenance
Read section titled "Safety Warnings" before maintaining tool.
1. With battery removed, make daily inspection to ensure free movement of workpiece contact and
trigger.
Do not use tool if workpiece contact or trigger sticks or binds.
2. Lubrication of the feed system is not necessary. DO NOT OIL.
3. Wipe tool clean daily and inspect for wear, especially the workpiece contact. Replace as necessary.
WARNING
Repairs other than those described here should be performed only by trained,
qualified personnel. Contact SENCO for information at 1-800-543-4596.
Accessories
SENCO offers a full line of accessories for your SENCO tools, including:
• Battery
• Belt Hook
• Battery Charger
• Safety Glasses
For more information or a complete illustrated catalogue of SENCO accessories, ask your representative or
www.senco.com.
TOOL OPERATION
CHARGER LABEL ICON
----
Evaluating / HOT
----
Battery Disposal
• To preserve natural resources, please recycle or dispose of properly.
This product contains Li-Ion. Local state or federal laws may prohibit
disposal of Li-Ion batteries in ordinary trash.
• Consult your local waste authority for information regarding available
recycling and/or disposal options.
• For more information on battery recycling call 1-800-8BATTERY.
BATTERY PACK INSERTED?
No
Yes
Yes
Yes
Yes
Yes
Yes
19
RED LIGHT/GREEN LIGHT
OFF / OFF
FLASH / OFF
ON / OFF
ON / FLASH
OFF / ON
OFF / FLASH
FLASH / FLASH
Advertisement
Table of Contents
