Maintenance - Senco RoofPro 445XP Operating Instructions Manual

mAINtENANCE

WArNINg
y y
Repairs other than those
described here should be per-
formed only by trained, qualified
personnel. Contact SENCO for
information at:
1-800-543-4596.
y y
Read section titled "Safety Warn-
ings" before maintaining tool.
y y
All screws should be kept tight.
Loose screws result in unsafe
operation and parts breakage.
y y
With tool disconnected, make
daily inspection to assure free
movement of workpiece contact
(safety element) and trigger. Do
not use tool if workpiece contact
(safety element) or trigger sticks
or binds.
y y
Squirt Senco pneumatic oil (5 to
10 drops) into the air inlet twice
daily (depending on frequency
of tool use). Other oils may dam-
age O-rings and other tool parts.
y y
Wipe tool clean daily and inspect
for wear. Use non-flammable
cleaning solutions only if neces-
sary.
y y
Do Not soAK.
y y
Caution: Such solutions may
damage O–rings and other tool
parts.
9