Audi Q7 2014 Owner's Manual page 295

and avoid any hard steering or braking
maneuvers. Stop as soon as possible and
check the tires and the ir pressures. In·
flate the tire pressure to the proper pres-
sure as indicated on the vehicle's tire
pressure label ¢
page 2
77. Driving on a
significantly under-inflated tire causes
the tire to overheat and can lead to tire
failure. Under-inflation also is likely to
impair the vehicle's handling and stop-
ping ability.
- The driver is responsible for maintaining
the correct tire pressures. You must
check the tire pressures regularly.
- Under certain conditions (such as a spor-
ty
driving style, winter conditions or un-
paved roads), the pressure monitor indi-
cator may be delayed.
- Ask your authorized Audi dealer if run-
flat tires may be used on your vehicle.
Your vehicle registration becomes invalid
if you use these tires when not permit-
ted. Damage to your vehicle or accidents
could also result.
@
Tips
- The tire pressure monitoring system
stops working when there is an ESC/ABS
malfunction.
- Using snow chains may result in a system
malfunction.
- The tire pressure monitoring system on
your Audi was developed using tires with
the "AO" or "RO" identification on the
tire sidewall¢ page 284. We recom-
mend using these tires.
Reset tire pressure monitoring system
If the tire pressure is adjusted, wheels are ro-
tated or changed, the TPMS must be reset via
MMI.
.,. Before resetting the TPMS, the current pres-
sures of all four tires must correspond to
the specified values. Adjust the tire pressure
and reset the pressure in the tire pressure
Tires and wheels 293
monitoring system according to the load
you are carrying ¢ page 277.
.,. Turn on the ignition.
.,. Select:
!CAR I
function button > Systems*
control button > Tire pressure monitoring >
Store now . Or
.,. Select:
!CAR I
function button> Car systems*
control button > Servicing & checks > Tire
pressure monitoring > Store tire pressures.
@
Tips
Do not store the tire pressure if there are
snow chains on the tire.
•
•