[Networksettings] - Sony BDV-HZ970W Operating Instructions Manual

• [Quick Start Mode]
[On]: Shortens the startup time from standby
mode. You can operate the system quickly after
turning it on.
[Off]: The default setting.
• [Auto Standby]
[On]: Turns on the [Auto Standby] function.
When you do not operate the system for about
30 minutes, the system enters standby mode
automatically.
[Off]: Turns offthe function.
• This function does not work while the sleep timer is
set.
• [Auto Display]
[On]: Automatically displays information on the
screen when changing the viewing titles, picture
modes, audio signals, etc.
[Off]: Displays information only when you
press DISPLAY.
• [Screen Saver]
[On): Turns on the screen saver function.
[Otfl: Off
• [Software Update Notification]
[On]: Sets the system to inform you of newer
software version information (page 59).
[Off[: Off
• [Gracenote Settings]
[Auto]: Automatically downloads disc
information when you stop playback of the disc.
To download, the system must be connected to
the network.
[Manual]: Downloads disc information when
you select [Playback History List] or
[Information Display] in the options menu.
• [DivX® VOD]
(Except for U.S. models)
You can display the registration or
deregistmtion code for this system, or deregister
this system after registration.
When the registration is disabled
[Registration Cod@ The registration code is
displayed.
[Deregistmtion Code]: The deregistmtion code
is displayed. (This item can be selected only
after the registration code is displayed.)
When the registration is enabled
Press (--/-) to select [OK] or [Cancel], then
press @.
JOE): The device is deregistered and the
deregistmtion code is displayed.
[Cancel]: The system returns to the previous
display.
For more information, go to
http://www.divx.com on the Internet.
• [System Information]
You can display the system's software version
information and the MAC address.
[NetworkSettings]
You can make detailed settings for Internet and
network.
• [Internet Settings]
Connect the system to the network beforehand.
For details, see "Step 3: Connecting to the
Network" (page 28).
[View Network Status]: Displays the current
network status.
[Wired Setup]: Select this when you connect to
a broadband router directly.
[USB Wireless Setup]: Select this when you use
a USB Wireless LAN Adapter.
For more information, go to
http://www.sony.com/blumyht support
• [Network Connection Diagnostics]
You can run the network diagnostics to check if
the network connection has been made properly.
64u_