[Audiosettings] - Sony BDV-HZ970W Operating Instructions Manual

• [YCbCr/RGB (HDMI)]
[Auto]: Automatically detects the type of
external device, and switches to the matching
color setting.
[YCbCr (4:2:2)]: Outputs YCbCr 4:2:2 video
signals.
[YCbCr (4:4:4)]: Outputs YCbCr 4:4:4 video
signals.
[RGB]: Select this when connecting to a device
with an HDCP-compliant DVI jack.
• [HDMI Deep Color Output]
[Auto]: Normally select this.
[12bit], [10bit]: Outputs 12bit/l 0bit video
signals when the connected TV is compatible
with Deep Color.
[Off]: Select this when the picture is unstable or
colors appear unnatural.
• [Pause Mode] (BD/DVD VIDEO/DVD-R/
DVD-RW only)
[Auto]: The picture, including subjects that
move dynamically, is output with no jitter.
Normally select this position.
[Frame]: The picture, including subjects that do
not move dynamically, is output in high
resolution.
[AudioSettings]
• [BD Audio MIX Setting]
[On]: Outputs the audio obtained by mixing the
interactive audio and secondary audio to the
primary audio.
[Off[: Outputs the primary audio only. Select
this when outputting HD audio signals to an AV
receiver.
• [Audio DRC]
You can compress the dynamic range of the
sound track.
[Auto]: Performs playback at the dynamic range
specified by the disc (BD-ROM only).
[Off]: No compression of dynamic range.
[On]: The system reproduces the sound track
with the kind of dynamic range that the
recording engineer intended.
• [Attenuate - AUDIO]
Distortion may occur when you listen to a
component connected to the AUDIO (AUDIO
IN L/R)jacks. You can prevent distortion by
reducing the input level on the unit.
[On]: Attenuates the input level. The output
level is changed.
[Off[: Normal input level.
• [Audio Output]
The system cannot output multi-channel sound
fiom both the HDMI (OUT) jack and system's
speakers simultaneously.
_: Outputs multi-channel sound fiom
the system's speakers only.
[Speaker + HDMI]: Outputs multi-channel
sound fiom the system' s speakers and 2-channel
linear PCM signals fiom the HDMI (OUT)jack.
[HDMI]: Outputs multi-channel sound fiom the
HDMI (OUT) jack only. Sound format depends
on the connected component.
• Even if [HDMI] or [Speaker + HDMI] is selected, the
sound of functions other than "BD/DVD," "D.
MEDIA," "HDMII ," or "HDMI2" is output from the
system's speakers, not from the HDMI (OUT)jack.
• When you set [Audio Output] to [HDMI], the
SOUND MODE, "TONE," "NIGHT MODE," and
"SUR.SETTING" I'unctions arc disabled.
• When the System Audio Comrol I'unction (page 51)
is activated, this setting may change automatically.
• [Sound Effect]
You can set the system' s sound effects (SOUND
MODE, "TONE," "NIGHT MODE," and
"SUR.SETTING") to on/off.
[On]: Enables all of the system' s sound effects.
The upper limit of sampling fiequency is set to
48 kHz.
[Off]: The sound effects are disabled. Select this
when you do not want to set the upper limit of
sampling fiequency.
m,
€-
3
O
61us